CROSSOVER 3 WAY DBX - 234 XS

Sukses dengan produk 234 XL, kini DBX pun juga merilis DBX - 234 XS. Yup. Crossover generasi kedua & jauh lebih baik lagi ketimbang awalnya. Crossover ini juga tidak mau kalah eksis dengan adiknya. Membagi suara juga adalah tugas utama dalam alat ini. LOW, MID & HiGH akan menjadi sempurna oleh karena alat ini. CROSSOVER AKTIF DBX - 234 XS, harga Rp. 1.450.000, - Kami Menjual Barang ECERAN dengan harga GROSIR Harga yang kami cantumkan belum termasuk ONGKOS KIRIM Specification : Input Connectors XLR Input Type Electronically balanced/ unbalanced, RF filtered Input Impedance Balanced > 50k ohm, unbalanced > 25k ohm Max Input > + 22dBu balanced or unbalanced CMRR > 40dB, typically > 55dB at 1kHz Output Connectors XLR Output Type Impedance-balanaced/ unbalanced, RF filtered Output Impedance Balanced 60 ohm, unbalanced 30 ohm Max Output > + 21dBu balanced/ unbalanced into 2k ohms or greater Bandwidth 20Hz to 20kHz, + / -0.5dB Frequency Response 90 kHz, + 0/ -3 dB Signal to Noise Ratio Ref: + 4 dBu, 22 kHz measurement bandwidth Signal-to-Noise ( Stereo Mode) > 94dB ( Low Output) , > 93dB ( Mid Output) , > 90dB ( High Output) Signal-to-Noise ( Mono Mode) > 94dB ( Low Output, Low/ Mid Output) ; > 92dB ( High/ Mid Output) ; > 88dB ( High Output) Dynamic Range > 106 dB, unweighted, any output THD+ Noise < 0.004% at + 4 dBu, 1 kHz; < 0.04% at + 20 dBu, 1 kHz Interchannel Crosstalk < -80 dB, 20 Hz to 20 kHz Crossover Frequencies ( Stereo Mode) Low/ Mid: 45 to 960 Hz or 450 Hz to 9.6 kHz ( x10 setting) ; Low/ High: 45 to 960 Hz or 450 Hz to 9.6 kHz ( x10 setting) ; Mid/ High 450Hz to 9.6kHz ( x10 setting) Crossover Frequencies ( Mono Mode) Low/ Low-Mid: 45 to 960 Hz or 450 Hz to 9.6 kHz ( x10 setting) ; Low-Mid/ High-Mid: 450 Hz to 9.6 kHz; High-Mid/ High: 450 Hz to 9.6 kHz Crossover Filter Type Linkwitz-Riley, 24 dB/ octave, state-variable Low cut Switch Activates 40 Hz Butterworth, 12 dB/ octave high-pass filter, one switch per channel. Phase Invert Switch Inverts the phase at the output, one switch per output. x1 / x10 Switch Multiplies the low-high( mono: low/ mid and high/ mid) crossover frequency range of the front-panel markings by a factor of 1 or 10, one switch per channel. Mode Switch Selects stereo/ mono and 2/ 3/ 4-way operation LF Sum Switch Selects normal ( stereo) or mono-summed low frequency operation and disables Ch 2’ s low output phase invert LED to indicate that this output is not operational in the LF sum mode. Indicators Stereo Operation ( Green) ; Mono Operation ( Yellow) ; Low Cut ( Red-per channel) ; x10 ( Green-per channel) ; Phase Invert ( Red-per output) Operating Voltage 100-120 VAC 50/ 60Hz; 120 VAC 60Hz 230 VAC 50/ 60Hz Operating Temperature 32° F to 113° F ( 0° C to 45° C) Power Consumption 15W