Detail CROSSOVER DBX - 234 XL
Crossover ini adalah crossover yang cukup bersahabat bagi para pemula. Alat ini juga sangat baik dibangun dengan kontrol yang tepat. Juga, Anda tidak akan menemukan catu daya eksternal yang biasanya menyertai prosesor dalam kisaran harga ini. Sebuah catu daya berkualitas tinggi dibangun ke dalam unit. Semua input dan output konektor XLR seimbang yang disekrup langsung ke sasis. Hal ini menjamin bahwa bahkan jika seseorang menginjak kabel yang dipasang ke dalam unit, itu tidak akan merobek papan sirkuit dalam. Ia juga memiliki Linkwitz-Riley 24dB per oktaf filter, standar profesional. Membagi suara juga adalah tugas utama dalam alat ini. LOW, MID & HiGH akan menjadi sempurna oleh karena alat ini.
CROSSOVER AKTIF DBX - 234 XL, harga Rp. 1.250.000, -
Kami Menjual Barang ECERAN dengan harga GROSIR
Harga yang kami cantumkan belum termasuk ONGKOS KIRIM
Specification :
Input Connectors XLR
Input Type Electronically balanced/ unbalanced, RF filtered
Input Impedance Balanced > 50k ohm, unbalanced > 25k ohm
Max Input > + 22dBu balanced or unbalanced
CMRR > 40dB, typically > 55dB at 1kHz
Output Connectors XLR
Output Type Impedance-balanaced/ unbalanced, RF filtered
Output Impedance Balanced 60 ohm, unbalanced 30 ohm
Max Output > + 21dBu balanced/ unbalanced into 2k ohms or greater
Bandwidth 20Hz to 20kHz, + / -0.5dB
Frequency Response 90 kHz, + 0/ -3 dB
Signal to Noise Ratio Ref: + 4 dBu, 22 kHz measurement bandwidth
Signal-to-Noise ( Stereo Mode) > 94dB ( Low Output) , > 93dB ( Mid Output) , > 90dB ( High Output)
Signal-to-Noise ( Mono Mode) > 94dB ( Low Output, Low/ Mid Output) ; > 92dB ( High/ Mid Output) ; > 88dB ( High Output)
Dynamic Range > 106 dB, unweighted, any output
THD+ Noise < 0.004% at + 4 dBu, 1 kHz; < 0.04% at + 20 dBu, 1 kHz
Interchannel Crosstalk < -80 dB, 20 Hz to 20 kHz
Crossover Frequencies ( Stereo Mode) Low/ Mid: 45 to 960 Hz or 450 Hz to 9.6 kHz ( x10 setting) ; Low/ High: 45 to 960 Hz or 450 Hz to 9.6 kHz ( x10 setting) ; Mid/ High 450Hz to 9.6kHz ( x10 setting)
Crossover Frequencies ( Mono Mode) Low/ Low-Mid: 45 to 960 Hz or 450 Hz to 9.6 kHz ( x10 setting) ; Low-Mid/ High-Mid: 450 Hz to 9.6 kHz; High-Mid/ High: 450 Hz to 9.6 kHz
Crossover Filter Type Linkwitz-Riley, 24 dB/ octave, state-variable
Low cut Switch Activates 40 Hz Butterworth, 12 dB/ octave high-pass filter, one switch per channel.
Phase Invert Switch Inverts the phase at the output, one switch per output.
x1 / x10 Switch Multiplies the low-high( mono: low/ mid and high/ mid) crossover frequency range of the front-panel markings by a factor of 1 or 10, one switch per channel.
Mode Switch Selects stereo/ mono and 2/ 3/ 4-way operation
LF Sum Switch Selects normal ( stereo) or mono-summed low frequency operation and disables Ch 2’ s low output phase invert LED to indicate that this output is not operational in the LF sum mode.
Indicators Stereo Operation ( Green) ; Mono Operation ( Yellow) ; Low Cut ( Red-per channel) ; x10 ( Green-per channel) ; Phase Invert ( Red-per output)
Operating Voltage 100-120 VAC 50/ 60Hz; 120 VAC 60Hz 230 VAC 50/ 60Hz
Operating Temperature 32° F to 113° F ( 0° C to 45° C)
Power Consumption 15W
Tampilkan Lebih Banyak